unisonic technologies co., ltd UTC606P-H preliminary power mosfet www.unisonic.com.tw 1 of 3 copyright ? 2015 unisonic technologies co., ltd qw-r502-b34.b -6a, -12v, p-channel 1.8v trench mosfet ? description the utc UTC606P-H is a p-channel mosfet, it uses utc?s advanced technology to provide the customers with a minimum on state resistance and high switching speed. the utc UTC606P-H is suitable for battery management, load switch and battery protection. ? features * r ds(on) < 26m ? @ v gs = -4.5v, i d = -6a r ds(on) < 35m ? @ v gs = -2.5v, i d = -5a r ds(on) < 53m ? @ v gs = -1.8v, i d = -4a * high switching speed * high performance trench technology for extremely low r ds(on) ? symbol sot-26 1 2 3 4 5 6 ? ordering information ordering number package pin assignment packing 1 2 3 4 5 6 utc606pg-ag6-r sot-26 d d g d d s tape reel note: pin assignment: g: gate d: drain s: source ? marking
UTC606P-H preliminary power mosfet unisonic technologies co., ltd 2 of 3 www.unisonic.com.tw qw-r502-b34.b ? absolute maximum ratings (t a =25c unless otherwise noted) parameter symbol ratings unit drain-source voltage v dss -12 v gate-source voltage v gss 8 v drain current continuous (note 2) i d -6 a pulsed i dm -20 a power dissipation p d 300 mw junction temperature t j -55~+150 c storage temperature range t stg -55~+150 c note: absolute maximum ratings are those values beyond which the device could be permanently damaged. absolute maximum ratings are stress ratings only and functional device oper ation is not implied. ? thermal characteristics parameter symbol ratings unit junction to ambient ja 380 c/w junction-to-case jc 110 c/w ? electrical characteristics (t a =25c, unless otherwise noted) parameter symbol test conditions min typ max unit static parameters drain-source breakdown voltage bv dss i d =-250a, v gs =0v -12 v breakdown voltage temperature coefficient j dss t ? bv ? i d =-250a, referenced to 25c -3 mv/ c zero gate voltage drain current i dss v ds =-10v, v gs =0v -1 a gate-source leakage current forward i gss v gs =+8v, v ds =0v 100 na reverse v gs =-8v, v ds =0v -100 na on characteristics (note) gate threshold voltage v gs ( th ) v ds =v gs , i d =-250a -0.4 -0.5 -1.5 v gate threshold voltage temperature coefficient j ) th ( gs t ? bv ? i d =-250a, referenced to 25c 2.5 mv/ c static drain-source on-state resistance r ds(on) v gs =-4.5v, i d =-6a 21 26 m ? v gs =-2.5v, i d =-5a 26 35 m ? v gs =-1.8v, i d =-4a 34 53 m ? v gs =-4.5v, i d =-6a, t j =125c 28 35 m ? on state drain current i d ( on ) v gs =-4.5v, v ds =-5v -20 a forward transconductance g fs v ds =-5v, i d =-6a 25 s dynamic parameters input capacitance c iss v gs =0v, v ds =-6v, f=1.0mhz 1699 pf output capacitance c oss 679 pf reverse transfer capacitance c rss 423 pf switching parameters (note) total gate charge q g v gs =-4.5v, v ds =-6v, i d =-6a 18 25 nc gate to source charge q gs 3 nc gate to drain charge q gd 4.2 nc turn-on delay time t d ( on ) v gs =-4.5v, v dd =-6v, i d =-1a, r gen =6 ? 11 19 ns rise time t r 10 20 ns turn-off delay time t d ( off ) 89 142 ns fall-time t f 70 112 ns source- drain diode ratings and characteristics maximum continuous drain?source diode forward current i s -1.3 a drain?source diode forward voltage v sd i s =-1.3a,v gs =0v (note) -0.6 -1.2 v note: pulse test: pulse width 300s, duty cycle 2.0%
UTC606P-H preliminary power mosfet unisonic technologies co., ltd 3 of 3 www.unisonic.com.tw qw-r502-b34.b utc assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all utc products described or contained herein. utc products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. the information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.
|
